 |
|
P103
PURE PTFE BRAIDED PACKING
¡¡¡¡The packing , made of raw film twists of pure PTFE dispersion
resins, is suitable for valves and pumps nsed in food processing
, pharmaceuticals,paper mills, fiber plants, where high puity
and corrosion resistance is required.(two kings:with oil and
without oil)
¡¡*Application:
¡¡Max. working temperture:260¡æ
¡¡Max. working pressure:2.0Mpa
¡¡PH: 0-14
¡¡Spec:3mm - 60mm |
| |
 |
|
GP103
GRAPHITE-PTFE BRAIDED PACKING
¡¡The packing is woven of graphite PTFE yarn twisted through
a mixture of PTFE dispersion resins, and fine graphite powder
plus moderate amount of heat-resistant lubricant. Apart from
its corrosion resistance, it has thermal conductvity and self-lubricating
properties.
¡¡*Application:
¡¡Max. working temperature:280¡æ
¡¡Max. working pressure:2.0Mpa
¡¡PH: 0-14
¡¡Spec: 3mm - 60mm |
| |
|
|
 |
|
CP103
CARBON FIBER BRAIDED PACKING
Carbon fiber packing is made from carbon fiber impregnated with
PTFE dispersion, braided into square cross section and lubricated.
Inert almost all corrosive. When used for pumps, frictional
heat is freely conductuity and thus does not acause damage to
the packing.
¡¡*PH: 2-14
¡¡Spec: 3mm - 60mm
¡¡Temperature refractoriness: 300¡æ |
| |
|
|
 |
|
PC103
COTTON YARN PTFE BRAIDED PACKING
Plaited with cotton yarn soaked in polyterafluoroethylene emulsion.
Suited to make corrosion-resistance mechanical sealings.(two
kinds:with and without oil)
¡¡*PH: 2-14
¡¡Spec: 3mm - 60mm
¡¡Temperature refractoriness: 100¡æ¡¡£150¡æ |
| |
|
|
 |
|
PK-W103
, PK-B103 PTFE AND KEVLAR BLENDED PACKING
High-quality combination of PTFE with incorporated graphite
and additional reinforcement of sliding surface of aramid yarn.
Good sliding velocity and thermal conductivity. It is recommended
for centrifugal pumps with high pressure and sliding velocity
as for abrasive media. It can be used for water ,sewage, water,hot
water,oils, greases , gases,weak acids and alkaline.
¡¡*PH: 2-13
¡¡Spec: 3mm - 60mm
¡¡Temperature refractoriness: -200¡æ¡¡£260¡æ |
| |
|
|
 |
|
KF103
KEVLAR FIBER BRIDED PACKING
KF103 is manufactured from Du Pont's Kevlar yarn impregnated
with PTFE dispersion and treated with lubricant, braided into
square cross section. It affords longer life under severe conditions
which conventional asbestos packing can not provide satisfactorily.
¡¡*PH: 2-12
¡¡Spec: 3mm - 60mm
¡¡Temperature refractoriness: -150¡æ¡¡£250¡æ
|
| |
|
|
¡¡